EasyManuals Logo

Atag VA98211QT/A08 User Manual

Atag VA98211QT/A08
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
ActionPossible causesProblem
Activate the Long dry option.Drying power too low.The dishes are not dry enough.
Fully load the dishwasher.The dishwasher is not fully loaded.
Top up with rinse add or increase the rinse
aid dosage. See the sections Before washing
for the first time and Settings.
Rinse aid needs topping up or dosage is set
too low.
Inactivate the setting TAB (3-in-1/ All-in-one
detergent) and top up salt and rinse aid.
3-in-1/ All-in-one detergent is used and the
setting TAB (3-in-1/ All-in-one detergent) is
activated.
Open the door a little once the programme
has finished.
Check that the baskets are correctly
positioned horizontally.
The baskets are not correctly positioned.Cannot close door.
Check that the dishes are not blocking the
baskets from sliding properly into place.
Wait a moment then try again.You have pressed the touch buttons too soon
after opening the door.
The touch buttons do not react when
pressed.
Clean with a dry or slightly damp cloth.Dirt on the touch buttons.
Open the door until the display lights up.
Alternatively, close the door and wait 30
seconds. Then open the door again.
If this symbol appears on the display
the door is not open enough.
See the section Settings.Child lock (button lock) activated.
17

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag VA98211QT/A08 and is the answer not in the manual?

Atag VA98211QT/A08 Specifications

General IconGeneral
BrandAtag
ModelVA98211QT/A08
CategoryDishwasher
LanguageEnglish

Related product manuals