EasyManuals Logo

Atag WIZE User Manual

Atag WIZE
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
Prevent freezing of your central heating installation
WhenthethermostathasbeenswitchedoffforboththeCom-
fort setting and the central heating (the (!) symbol is visible),
the thermostat will keep room temperature at a minimum of
5°C(Frostprevention).Thisisthecasewhen‘UIT’(OFF)has
been selected in the central heating menu and the tapwater
menu. However, it is advisable not to set the thermostat lower
than approx. 12°C. This reduces the risk that parts of your cen-
tral heating system or water pipes will freeze considerably, in
particular when the pipes are located in a frost-exposed area.
6 Trouble-shooter
This chapter explains some faults and questi-
ons you may have regarding the functioning of
the thermostat.
Questions / complaints about your heating installation
Explanations are given in respect of likely questions.
Faults
Explanations are also given in respect of faults usually indica-
ted by the
!
symbol. Check whether you can solve the faults
yourself and call your installer if necessary. These faults may
also be caused by a connected boiler. Therefore, also check
the boiler’s display screen and refer to the corresponding
manual.
Questions / complaints about your
heating installation
Heating up takes a long time in the morning.
• Areallradiatortapsopen?Checkitout.
• Isthenighttemperaturenotsettoolow?Youmayincrease
the current night temperature by 1 or 2 degrees to prevent
slow heat up.
• Consultyourinstallerifthecomplaintpersists.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag WIZE and is the answer not in the manual?

Atag WIZE Specifications

General IconGeneral
BrandAtag
ModelWIZE
CategoryThermostat
LanguageEnglish

Related product manuals