Atag XL110 User Manual

Installation & Servicing instructions ATAG XL
4
1 Introduction
These instructions describe the functioning, installation, use and primary maintenance of
ATAG central heating boilers for the United Kingdom and Ireland. Where necessary the
di󰀨erentregulationsforeachcountryareseparatelydescribed.
These instructions are intended for the use of Gas Safe registered installers or registered
Bord Gais installers in connection with the installation and putting into operation of ATAG
boilers. It is advisable to read these instructions thoroughly, well in advance of installation.
Separate instructions for use are supplied with the boiler for users of ATAG central heating
boilers. ATAG is not liable for the consequences of mistakes or shortcomings which have
found their way into the installation instructions or user’s manual. Further, ATAG reserves
therighttoalteritsproductswithoutpriornotication.
When delivering the boiler, give the customer clear instructions concerning its
use; present the customer with the user’s manual and card.
With regard to installing ue systems and/or external controls, we refer you to
the supplier involved.
Eachboileristtedwithanidenticationplate.Consultthedetailsonthisplatetoverify
whether the boiler is compliant with its intended location, e.g.: gas type, power source
andexhaustclassication.
Oncompletionoftheinstallation,theinstallerorcommissioningengineermustllout
and complete the Commercial Commissioning/Service Sheet supplied with the boiler
and hand this to the customer for future record keeping. The Service Sheet must also
be completed by the service agent following each service call, and returned to the
customer. A copy of the Commercial Commissioning/Service Sheet must be returned to
ATAG Heating along with the warranty registration card to register the appliance for the
standardwarrantybenets.

Atag XL110 Specifications

General

Brand	Atag
Model	XL110
Category	Boiler
Language	English