To Next PageTo Next Page
Need help?Do you have a question about the AT&T 1825 and is the answer not in the manual?
General| Brand | AT&T |
|---|---|
| Model | 1825 |
| Recording Time | Up to 14 minutes |
| Number of Messages | 20 |
| Caller ID | Yes |
| Remote Access | Yes |
| Voice Time Stamp | Yes |
| Time/Day Stamp | Yes |
| Message Forwarding | No |
| Number of Mailboxes | 1 |
| Call Waiting Caller ID | Yes |
| Phonebook Capacity | 50 |
| Display | LCD |
| Handset Speakerphone | Yes |
| Expandable | No |
| Power Source | AC Adapter |
Steps to install the answering system for table or desk use, including battery and cord connections.
Instructions for mounting the answering system on a wall, including handset and cord setup.
Troubleshooting steps for when the telephone does not produce a dial tone.
Steps to resolve issues with dialing numbers or slow dialing.
Guidance for issues related to the message window or system indicator lights.
What to do when the low battery indicator light is illuminated.
Steps to take if the telephone fails to ring.
Reasons why recorded messages might be incomplete or cut off.
Diagnosing why the system does not answer calls after the expected number of rings.
Steps to fix problems with the system not responding to remote commands.
Information on how power failures affect the system and its features.
Explanation for the 'CL' display and the action required.
Instructions on how to initiate and receive phone calls.
How to switch between touch tone and dial pulse modes.
Adjusting the ringer volume or turning it off.
How to adjust the listening volume for handset and speakerphone.
Using the redial feature to call the last dialed number.
How to set up and use the auto redial feature.
Putting a call on hold and taking it off hold.
Using the mute function to prevent the other party from hearing you.
Using the flash button for call waiting and other services.
Using temporary tone dialing for special services with rotary dialing.
Steps to store phone numbers in the telephone's memory.
How to dial numbers stored in the telephone memory.
Saving a number that was just dialed into memory.
Procedure for setting the current day and time on the answering system.
Explanation of the four available mailboxes for messages.
Guidance on recording announcements for callers.
Detailed steps for recording a custom announcement.
How to listen to a recorded announcement.
Instructions for activating and deactivating the answering system.
Adjusting the volume of the system's speaker.
How the system answers calls and manages incoming messages.
Setting the number of rings before the system answers or using toll saver.
Understanding the displays and indicators in the message window.
Meaning of the mailbox indicator lights.
Enabling an audible alert for new messages.
How to monitor incoming calls and decide whether to answer.
Methods for playing back recorded messages in mailboxes.
How to preview the first few seconds of messages.
Information on message storage capacity and saving.
Listening to messages privately through the handset.
Steps to move a recorded message from one mailbox to another.
Instructions for deleting all or selected messages from mailboxes.
How to record a memo for playback with other messages.
Steps to record a phone conversation using the system.
How the priority call signal alerts you to important calls.
Procedure to change the preset priority calling code.
What happens when the answering system memory is full.
How to change the remote access code for remote operation.
Information on accessing system features remotely using a code.
Steps to connect to the answering system remotely.
How to play messages remotely from different mailboxes.
Accessing messages in mailboxes other than the default.
Recording a new announcement remotely.
Recording a memo remotely.
Using the remote room monitor and intercom features.
How to properly end a remote access session.
Deleting messages remotely from mailboxes.
Procedure to change the remote access code.
How to turn the answering system off remotely.
How to turn the answering system on remotely.
Troubleshooting memory full status when operating remotely.
Using the voice help menu for remote commands.
