Components
If there is trouble with your system, Indicator Lights will tell you what the problem
is. See page 15 for what each Indicator Light means.
l
Press
Messages
to see if any trouble conditions or alarms have occured
(see page 14).
l Press Clear Display to erase records of alarms and trouble messages.
l Press Test/Demo to silence trouble beeps (see page 14). This button is also
used during a test or demonstration (see page 32). This button will not cancel
an intrusion alarm.
l Press Cancel
to
cancel an accidental alarm (see page 12). This button will not
cancel an intrusion alarm.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...