l Components
Wireless Local Keypad (Keypad Transmitter)
The Wireless Local Keypad enables you to change the settings of the door
controlled by this keypad. Like the Wireless System Keypad, it can also cancel an
alarm, generate a Panic Alarm, and generate an Ambush Alarm, if your system is
equipped with this feature. To change the settings of the Wireless Local Keypad:
1 Enter your security code on the keypad.
2
Move the slide switch to the setting you want. The settings are:
l Instant
-
The sensor attached to this keypad will generate an immediate
alarm when your system is in the AWAY or HOME mode.
l Delay
-
The sensor attached to this keypad will generate a 40-second
delayed alarm when your system is in the AWAY or HOME
mode. During the delay the Central Controller will beep every 3
seconds. Use this setting if you intend to use this door to enter
your home.
l Interior
-
The sensor attached to this keypad will generate an alarm only
when your system is in the AWAY mode. It is disarmed when
your system is set to HOME.
l Disarm
-
The sensor attached to this keypad is disarmed even if your
system is set to HOME or AWAY.
NOTE: Setting the Wireless Local Keypad to Disarm does not disarm the
Panic Alarm
feature, the tamper detector, or any 24-hour sensors that are
connected to the transmitter. However, if you try to arm the system when a
keypad is set to Disarm, the Central Controller will beep 4 times to indicate that
the transmitter is not secure.
21
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General