Alarms and Trouble Beeps
Automatic Disarm Period
After your system sounds a fire, environmental, or auxiliary alarm, it will not
repeat the same kind of alarm for five minutes. This Automatic Disarm
Period gives you time to clear away smoke or otherwise tend to the
emergency, without having another alarm of this type go off. During this
period, AA will be displayed at the Central Controller.
Silencing Alarms
To silence any alarm, enter your security code on a keypad. This will
silence an alarm that is already sounding and will cancel a delayed alarm
that has not yet sounded. You can cancel any type of alarm this way-fire,
intrusion, environmental, or auxiliary.
The Cancel key on your Central Controller will cancel a fire, environmental,
or auxiliary alarm, but it
will not cancel an intrusion alarm. Intrusion alarms
can only be cancelled by entering
your security code on a keypad.
NOTE:
If a false alarm occurs and your system is equipped with a
telephone dialer, call your monitoring service to inform them that there is
no emergency.
12
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General