17
Telephone settings
Telephone settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information.
Aer handset registration or a power failure, the handset will prompt you to
set the date and time.
Follow the steps to set the month, day, year and time.
1. When the handset is in idle mode, press MENU/SELECT to enter the main
menu.
2. Press qCID or pDIR to scroll to Set date/time and
then press MENU/SELECT.
3. Press qCID or pDIR to choose the month, then press
MENU/SELECT, or enter the number using the dialing
keys.
4. Press qCID or pDIR to choose the day, then press
MENU/SELECT, or enter the number using the dialing
keys.
5. Press qCID or pDIR to choose the year, then press
MENU/SELECT, or enter the number using the dialing
keys, then press MENU/SELECT to move on to set the
time.
6. Press qCID or pDIR to choose the hour, then press
MENU/SELECT, or enter the number using the dialing
keys.
7. Press qCID or pDIR to choose the minute, then press
MENU/SELECT, or enter the number using the dialing keys.
8. Press qCID or pDIR to choose AM or PM, then press MENU/SELECT to
conrm. There is a conrmation tone and the screen returns to the
previous menu.
NOTE: If the clock is not set when a message is recorded, the system announces, “Time and day not set,”
before it plays the message.
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM -
-
ECO
To Next Page
Loading...
Need help?
General
