Telephone settings
22
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Dial mode, then press
MENU/SELECT.
4. Use qCID or pDIR to highlight Touch-tone or Pulse, then
press MENU/SELECT. There is a confirmation tone and the screen returns to the
previous menu.
QUIET mode
When QUIET mode is turned on, the telephone silences all sounds during the
set period of time (1-12 hours). Aer you turn on QUIET mode, this feature
activates immediately and the answering system turns on automatically.
When QUIET mode is on, the answering system takes calls and records
messages without broadcasting them.
To turn QUIET mode on:
1. Press and hold QUIET # in idle mode to enter the QUIET mode setting
screen. The screen shows Quiet: _ _ hours (1-12 hours).
2. Use the dialing keys to enter the desired number of hours (1-12) you would
like to turn on QUIET mode, then press MENU/SELECT. Your screen shows
Quiet mode on and .
To turn QUIET mode o:
f While QUIET mode is on, press and hold QUIET #. The screen then shows
Quiet mode is off and you hear a confirmation tone.
NOTES:
f If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features when QUIET
mode is on, the sample plays but the feature is still muted after saving the setting.
f After QUIET mode is turned off or the set period of time has expired, all muted features will be activated again.
f Intercom is available during QUIET mode, but the handset will not ring.
f When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will be sent to the
answering system after screening. For more information on Smart call blocker, see page 44.
Touch-tone
ECO
Dial mode
ECO
To Next Page
Loading...
Need help?
General
