AT&T BL102-5 - Key Tone; Home Area Code

21
Telephone settings
Telephone settings
Key tone
The handset is set to beep with each key press. You can adjust the key tone
volume or turn it o. If you turn o the key tone, there are no beeps when
you press keys.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Key tone, then press
MENU/SELECT.
4. Use qCID or pDIR to select On or O.
5. Press MENU/SELECT to save your preference. There is a conrmation tone
and the screen returns to the
previous menu.
Home area code
If you dial 7 digits to make a local call (no area code required), enter your area
code into the telephone as the home area code. When you receive a call from
within your home area code, the caller ID history only displays the 7 digits of the
telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you dial
10 digits to make a local phone call, do not use this home area code feature. If
you do, you cannot place local calls from your caller ID log, as they will have only
7 digits.
To set the home area code:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Home area code, then
press MENU/SELECT.
4. Use the dialing keys to enter a three-digit home area
code.
f Press MUTE/DELETE to delete a digit.
f Press and hold MUTE/DELETE to delete all digits.
5. Press MENU/SELECT to save.
NOTE: If in the future, your telephone service provider requires you to dial 10 digits to make a local call (area
code plus telephone number), you need to delete your home
area code and dial out locally from the caller ID log. With the home area code displayed,
press and hold MUTE/DELETE until the digits are deleted, and then press MENU/SELECT.
The home area code is now restored to its default setting of _ _ _ (empty).
Key tone
ECO
Home are code
---
ECO
Home are code
ECO