AT&T BL102-5 - Options While on Calls; Volume Control; Call Waiting; Mute

Telephone operation
26
Options while on calls
Volume control
To adjust the listening volume of a handset:
f Press VOLUME or VOLUME on the handset while
on a call.
To adjust the listening volume of the telephone base:
f Press VOL or VOL while listening to the message
playback on the telephone base.
NOTES:
f Handset and speakerphone volume settings are independent.
f When the volume reaches the minimum or maximum setting,
you hear two beeps.
Call waiting
If you subscribe to call waiting service from your telephone service provider,
and someone calls while you are already on a call, you hear two beeps. Press
PHONE/FLASH to put your current call on hold and take the new call.
Press PHONE/FLASH at any time to switch back and forth between calls.
NOTE: Missed call waiting calls are not counted as missed calls.
Mute
Use the mute function to turn o the microphone. You
can hear the caller, but the caller cannot hear you.
To mute a call:
• While on a call, press MUTE/DELETE. When mute is on,
the handset screen shows Muted until you turn off
mute.
To end mute a call:
• Press MUTE/DELETE again. When mute is off, Microphone
on appears temporarily on the handset screen.
Muted
ECO
Microphone on
ECO