14
Ringer volume
You can set the ringer volume level to one of the six levels, or turn the ringer o.
When the ringer is o, appears on the handset screen.
Adjust a cordless handset volume:
1. MENU -> or -> Ringers -> SELECT.
2. SELECT to select Ringer volume.
3. or to choose the desire level -> SELECT.
Adjust the telephone base volume:
X Press /VOLUME or /VOLUME on the base when the phone system is not
in use.
LCD language
The LCD language is preset to English. You can select English, French or Spanish to
be used in all screen displays.
1. MENU -> or -> Settings -> SELECT.
2. SELECT again to select LCD language.
3. or to choose English, Français or Español -> SELECT.
Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to
English without going through the French or Spanish menus.
f Press MENU on the handset in idle mode -> enter 364#.
Dial mode
The dial mode is preset to touch-tone dialing. If you have pulse (rotary) service, you
need to change the dial mode to pulse dialing before using the telephone to make
a call.
1. MENU -> or -> Settings -> SELECT.
2. or -> Dial mode -> SELECT.
3. or to choose Touch-tone or Pulse -> SELECT.
Initial basic settings
To Next Page
Loading...
Need help?
General
