AT&T CL82229 - Temporary Tone Dialing; Set Speed Dial Voicemail Number; Operate

15
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone signals
to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the number. The telephone sends touch-tone
signals. The telephone automatically returns to pulse dialing mode aer you end
the call.
Set speed dial voicemail number
If you subscribe to a voicemail service offered by your telephone service provider,
you can save the voicemail number to 1 on each handset for easy access. When
you want to retrieve voicemail messages, press and hold 1.
1. MENU -> or -> Settings -> SELECT.
2. or -> Voicemail # -> SELECT.
3. Enter the voicemail number (up to 30 digits) ->
SELECT
to save.
Note: Contact your telephone service provider for more information and assistance about your
voicemail service.
Initial basic settings
Operation
Steps
Making a call
Press PHONE/FLASH or /SPEAKER ->
Enter the telephone number.
On-hook dialing
(predialing)
Enter the telephone number ->
Press PHONE/FLASH or /SPEAKER to call.
Answering a
call
Press PHONE/FLASH or /SPEAKER, or press any dialing
keys (0-9, TONE or #).
Ending a call
Press or return the handset to the
telephone base or charger.
Handset
speakerphone
During a call, press /SPEAKER to switch between handsfree
speakerphone and normal handset use.
Operate