AT&T CL82229 - Page 23

21
Adding number to the
Allow list
Add numbers that
you want to always
allow their calls to get
through without having
to go through the
screening process.
Via direct entry:
1. CALL BLOCK.
2. or -> Allow list -> SELECT.
3. or -> Add new entry -> SELECT.
4. Enter a telephone number up to 30 digits -> SELECT.
5. Enter a name up to 15 characters -> SELECT.
Via Caller ID log entry:
1. Press CID on the handset -> or .
2. Press SELECT when the desired entry appears.
3. or -> Allow list -> SELECT.
4. Press SELECT twice.
Adding name to the
Star name list
Add caller names to
your star name list to
allow their calls to get
through without having
to go through the
screening process.
Via direct entry:
1. CALL BLOCK.
2. or -> Star name list -> SELECT.
3. or -> Add new entry -> SELECT.
4. Enter a name up to 15 characters -> SELECT.
Via Caller ID log entry:
1. Press CID on the handset -> or .
2. Press SELECT when the desired entry appears.
3. or -> Star name list -> SELECT.
4. Press SELECT.
Note:
f There are many organizations like schools, medical oces, and pharmacies that use robocalls
to communicate important information to you. Robocall uses an autodialer to deliver pre-recorded
messages. By entering the EXACT Caller ID (CID)’s name of the organizations into the Star name
list, it ensures these calls will ring through when you only know the caller names but not their
numbers.
Smart call blocker