19
Telephone settings
Handset settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >Dial mode, then press
MENU/SELECT.
4. Use qCID or pDIR to highlight >Touch-tone or >Pulse,
then press MENU/SELECT. The screen showsThe screen shows DIAL MODE is
touch-tone or DIAL MODE is pulse. There is a confirmationThere is a confirmation
tone and the screen returns to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Web address, then press
MENU/SELECT.
QUIET mode
When QUIET mode is turned on, the telephone silences all sounds (except the
handset locator paging tone) during the set period of time (1-12 hours). After
you turn on QUIET mode, this feature activates immediately and the answering
system turns on automatically. When QUIET mode is on, the answering system
takes calls and records messages without broadcasting them.
To turn QUIET mode on:
1. Press and hold QUIET # in idle mode to enter the QUIET mode setting
screen. The screen shows Quiet: _ _ hours (1-12 hours).
2. Use the dialing keys to enter the desired number of hours (1-12) you
would like to turn on QUIET mode, then press MENU/SELECT. Your screen
briefly shows Answering sys is ON and then Quiet mode on.
To turn QUIET mode off:
While QUIET mode is on, press and hold QUIET #. The screen then shows
Quiet mode is off and you hear a confirmation tone.
NOTES:
If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features
when QUIET mode is on, the sample plays but the feature is still muted after saving the setting.
After QUIET mode is turned off or the set period of time has expired, all muted features will be
activated again.
The PTT function is not available when QUIET mode is on.
Intercom is available during QUIET mode, but the handset will not ring.
•
•
•
•
•
www.telephones.
att.com
Home area code
>Dial mode
p
q
DIAL MODE
>Touch-tone
p
q
To Next Page
Loading...
