Appendix
65
Handset display screen messages
Screen display messages
Not available
at this time
Someone else is already using the directory or caller ID history.
Other handset
is calling
(for systems with 2 handsets)
The other handset is calling.
Out of range OR No
pwr at base
The telephone base has lost power, or the handset is out
of range.
** Paging **
The cordless handset is paged by the telephone base.
Phone
The handset is on a call.
Place in charger
The battery is very low. The handset should be charged.
Rec mem full
The system recording time is full.
Quiet mode on
QUIET mode is on.
Quiet mode is off
QUIET mode is has been turned off.
Rec mem low
The system recording time is low.
Registering...
Please wait
The handset is registering to the telephone base.
Registration failed
The handset registration is not successful.
Ringer off
The ringer is turned off.
Ringer muted
The ringer is off temporarily while the handset is ringing.
Saved
An entry has been successfully saved in the directory.
Speaker
The handset speakerphone is in use.
To register HS,
see manual.
Screen display before handset registration.
To screen call,
press [SELECT]
Press MENU/SELECT to activate call screening.
TRANSFER TO:
(for systems with 3 or more
handsets)
You have started transferring a call, and need to enter the desired
handset number or choose all handsets.
Unable to call.
Line in use
Failed phone call (the telephone line is in use).
Unable to call.
Try again
You try to join a call when there are already 4 handsets on that call.
You try to make an outside call when another handset is
transferring a call with the intercom feature.
XX Missed calls
There are new calls in the caller ID history.
XX New messages
There are new messages in the answering system.
To Next Page
Loading...
Need help?
General
