AT&T CL82453 - Review the Directory; Review Directory Entries; Search by Name

Directory
36
Review the directory
Review directory entries
1. Press DIRp when in idle mode. The summary screen shows briefly and
then the first entry in the directory shows.
-OR-
Press MENU/SELECT when in idle mode, then press qCID or pDIR to scroll
to >Directory. Press MENU/SELECT twice.
2. Press qCID or pDIR to browse through the directory. Entries appear
alphabetically by the first letter in the name.
NOTES:
If the telephone number in the directory exceeds 15 digits, < appears in front of the telephone
number. Press TONE to move towards the end of the telephone number or press # (pound key)
to move towards the beginning of the telephone number.
if there are no directory entries. Directory empty appears briefly on the screen, followed by Add
contact? If you would like to add a new contact, press MENU/SELECT and refer to page 34 for
instructions on creating a new directory entry. Otherwise, press OFF/CANCEL to cancel.
Search by name
1. Press DIRp in idle mode to show the first listing in the directory.
2. When an entry appears, press the dialing keys (0-9) to start a name search.
The directory shows the first name beginning with the first letter associated
with the dialing key if there is an entry in the directory beginning with that
letter. Press qCID or pDIR to scroll through the directory.
3. To see other names starting with the letters on the same dialing key, keep
pressing the key. The names appear in alphabetical order.
For example, if you have the names Jennifer, Jessie, �evin and Linda in
your directory:
If you press 5 (J�L) once, you see Jennifer. Press qCID and you
see Jessie.
If you press 5 (J�L) twice, you see �evin.
If you press 5 (J�L) three times, you see Linda.
If you press 5 (J�L) four times, you see 5 and then the directory entry
beginning with 5 or the next closest entry after 5.
If you press 5 (J�L) five times, you see Jennifer again.
NOTES:
If there is no name matching the first letter of the key you press, the directory shows a name
matching the following letters of the key.
If you press a key (0-9) and no name starts with any of the letters on that key, the directory
shows the entry matching the next letter in the directory.
•
•
•
•
•
•
•
•
•