Answering system
57
Base message counter displays
The base message counter shows the total number of answering system
messages. See the table below for other message counter displays.
Message counter displays
0
No messages.
0 (flashing)
You need to set the clock (page 13).
1-99
Total number of old messages and memos, or message
number currently playing during old message playback.
1-99 (flashing)
Total number of messages and memos. The number
flashes when there are new or missed messages.
After a power failure, the number in the message counter
flashes to indicate that you need to set the clock.
1-99 & F (alternating)
Memory is full. You must delete some messages before
recording new messages.
- -
The system is answering a call, recording a message or
memo, or is being reached remotely.
The telephone line is in use.
0-6
Shows for two seconds while adjusting the telephone
base ringer volume.
1-8
Shows for two seconds while adjusting the telephone
base speaker volume.
To Next Page
Loading...
