AT&T CL82507 - Block Call; Send Call to Answering; System

Smart call blocker
101
Block call
1. When the telephone starts ringing, and
the screen displays Screened call, press
or /SPEAKER to pick up the
call. If you have turned on the caller ID announce
feature, the telephone announces “You have a
call from...
up the call, the telephone announces “To answer
the call, press 1. To answer and always allow this
number, press 2. To block this number, press 3. To
send this call to the answering system, press 4. To
repeat these options, press *”.
2. Press 3 or CALL BLOCK to block the call. The
telephone plays the block announcement “The
number you are calling is not accepting your call.
Please hang up.” to the caller. The telephone
number will be added to your block list.
Send call to answering system
1. When the telephone starts ringing, and
the screen displays Screened call, press
or /SPEAKER to pick up the
call. If you have turned on the caller ID announce
feature, the telephone announces “You have a
call from...
up the call, the telephone announces “To answer
the call, press 1. To answer and always allow this
number, press 2. To block this number, press 3. To
send this call to the answering system, press 4. To
repeat these options, press *”.
2. Press 4 to forward the call to the answering system.
Note: The call is forwarded to the answering system and the caller can leave a message even if
the answering system is off.
HANDSET 1
10/15
10:01
AM
Screened call
888-883-2445
10/15
10:01
AM
Added to
Block list
10/15
10:01
AM
Screened call
888-883-2445
10/15
10:01
AM
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON
Screen uncategorized calls