Telephone settings
28
Handset settings
QUIET mode
When QUIET mode is turned on, the telephone silences all sounds
during the set period of time (1-12 hours). However, the handset
locator paging tone and any sound-generating operations initiated
by users, such as making calls using the speakerphone or setting
QUIET mode,
this feature activates immediately and the answering system turns
on automatically. When QUIET mode is on, the answering system
takes calls and records messages without broadcasting them.
To turn QUIET mode on:
1. Press and hold QUIET # in idle mode to enter the QUIET mode
setting screen. The screen shows Quiet: _ _ hours (1-12 hours).
2. Use the dialing keys to enter the desired number of hours (1-12)
you would like to turn on QUIET mode, then press
MENU/SELECT.
Answering sys is ON and then Quiet
mode on.
To turn QUIET mode o:
While QUIET mode is on, press and hold QUIET #. The screen
then shows Quiet mode is o
Notes:
If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce
features when QUIET mode is on, the sample plays but the feature is still muted after saving the
setting.
After QUIET mode is turned off or the set period of time has expired, all muted features will be
activated again.
The PTT function is not available when QUIET mode is on.
Intercom is available during QUIET mode, but the handset will not ring.
When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will
be sent to the answering system after screening. For more information on Smart call blocker, see
page 68.
To Next Page
Loading...
