Smart call blocker
82
Call block settings
Save a caller ID log entry to allow list:
1. Search for the desired caller ID log entry (see Review the caller
ID log on page 61).
2. When the desired entry displays, press
MENU/SELECT.
3. Press
CID or DIR to scroll to Allow list, then press
MENU/SELECT.
4. The handset displays EDIT NUMBER. Use the dialing keys to edit
the number, when necessary.
Press CID or DIR
Press MUTE/DELETE on the handset to backspace and erase
a digit.
Press and hold MUTE/DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing
pause (a p appears).
5. Press
MENU/SELECT to move to the name. The screen displays
EDIT NAME.
6. Use the dialing keys to add or edit the name.
Press CID or DIR
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For
example, Johnson Charlie becomes Charlie Johnson when
you press # (pound key).
Press TONE to change the next letter to upper or lower case.
7. Press
MENU/SELECT when done and the screen shows Saved to
allow list.
To Next Page
Loading...
