AT&T CL83143 - LCD Language; Voice Language

Telephone settings
16
Handset settings
LCD language
You can select the language used for all screen displays.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press
MENU/SELECT to choose LCD language.
4. Press
qCID or pDIR to highlight English, Français or
Español, then press MENU/SELECT. The screen prompts
Set English/Français/Español as LCD language?
5.
Press MENU/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it
back to English without going through the French or Spanish menus. Press MENU/SELECT on
the handset in idle mode, then enter 364#. There is a confirmation tone.
Voice language
You can select the voice language (English or French) to be
used for the voice prompts in your answering system or caller
ID announce.
1. Press MENU/SELECT in idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3.
Use qCID or pDIR to scroll to Voice language, then press
MENU/SELECT.
4. Press MENU/SELECT to choose Answering sys, then press
MENU/SELECT.
-OR-
Use qCID or pDIR to scroll to Caller ID annc, then press
MENU/SELECT.
5. Press qCID or pDIR to choose English or Français, then press
MENU/SELECT to confirm your selection. You hear a confirmation tone.
LCD LANGUAGE
> English
p
q
Set Francais as
LCD language?
VOICE LANGUAGE
>English
p
q
> Answering sys
Caller ID annc
p
q
>Voice language
Caller ID annc
p
q