27
Telephone settings
Telephone base settings
LCD language
You can select the language used for all screen displays.
1. Press
MENU/SELECT in idle mode to enter the
main menu.
2.
Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press
MENU/SELECT to choose LCD language.
4. Press
qCID or pDIR to highlight English, Français
or Español, then press MENU/SELECT. The screen
prompts Set English/Français/Español as LCD
language?
5.
Press MENU/SELECT to confirm and save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it
back to English without going through the French or Spanish menus. Press MENU/SELECT on
the base in idle mode, then enter 364#. There is a confirmation tone.
Voice language
You can select the voice language (English or French) to
be used for the voice prompts in your answering system
or caller ID announce.
1. Press MENU/SELECT in idle mode to enter the main
menu.
2.
Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3.
Use qCID or pDIR to scroll to Voice language, then
press MENU/SELECT.
4. Press MENU/SELECT to choose Answering sys, then
press MENU/SELECT.
-OR-
Use qCID or pDIR to scroll to Caller ID annc, then press MENU/SELECT.
5. Press qCID or pDIR to choose English or Français, then press
MENU/SELECT to confirm your selection. You hear a confirmation tone.
LCD LANGUAGE
>
English
p
q
Set Francais as
LCD language?
>Voice language
Caller ID annc
p
q
>Answering sys
Caller ID annc
p
q
VOICE LANGUAGE
>English
p
q
To Next Page
Loading...
Need help?
General
