Directory
Create directory entries
Create a new directory entry
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Press
qCID or pDIR to scroll to Directory, then press
MENU/SELECT.
3. Press
qCID or pDIR to highlight Add contact.
4. Press
MENU/SELECT.
5.
Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
Press qCID or pDIR to move the cursor to the left
or right.
Press MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase a digit.
Press and hold MUTE/DELETE on the handset or
X/DELETE on the telephone base to erase all digits.
Press and hold REDIAL/PAUSE to enter a three-second
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/PAUSE and then qCID or pDIR, or pressing
REDIAL/PAUSE repeatedly to locate the number. Press
MENU/SELECT to copy the number.
6. Press
MENU/SELECT to move on to the name.
The display shows Number already saved if the number
is already in the directory. You cannot save the same
number twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character on that key
appears. Additional key presses produce other characters on that key.
See the chart on next page.
Press qCID or pDIR to move the cursor to the left or right.
Press 0 to add a space.
Press MUTE/DELETE on the handset or X/DELETE on the telephone base
to erase a character.
Press and hold MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase all characters.
Press a>A to change the next letter to upper or lower case.
•
•
•
•
•
•
•
•
•
•
59
ENTER NUMBER
888-883-2445
_
Review
>Add contact
p
q
Answering sys
>Directory
p
q
ENTER NAME
Robert Brown_
Saved
To Next Page
Loading...
