Parts checklist
Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
Cordless handset
Battery compartment cover
Telephone line cord
Power adapter for
telephone base
Telephone base
Battery for cordless handset
Abridged
User’s manual
Abridged user’s manual
CL83143
DECT 6.0 cordless telephone/
answering system with
caller ID/call waiting
Quick start guide
Caution: Use only the power adapter provided with this product. To obtain a replacement, visit
our website at www.telephones.att.com or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
Telephone base installation
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your Abridged user’s
manual provided in the package, or see the online Complete
user’s manual at www.telephones.att.com/manuals.
Quick start guide
CL83143
Raise the
antenna.
Plug the power cord and
the telephone line cord
into the jacks.
Route the power
adapter cord
through this slot.
Plug the large
end of the powe r
adapter into a
power outlet not
controlled by a wal l
switch.
Plug one end of the
telephone line cord
into a telephone
jack or a DSL filter.
If you have DSL
high-speed Internet
service, a DSL filter
(not included) is
required.
Route the
telephone line cord
through this slot.
BT183342/BT283342
2.4V 400mAh Ni-MH
To Next Page
Loading...
