AT&T CL84215 Quick Start Guide

17
Operation Steps
Make a call Using a cordless handset:
Press PHONE or /SPEAKER -> Enter the telephone number.
Using the telephone base:
Press /SPEAKER or lift the corded handset -> Enter the
telephone number.
On-hook dialing
(predialing)
Using a cordless handset:
Enter the telephone number -> Press PHONE or
/SPEAKER to call.
Answer a call Using a cordless handset:
Press PHONE or /SPEAKER, or press any dialing keys
(0-9, TONE or #).
Using the telephone base:
Press /SPEAKER, or lift the corded handset
End a call Using a cordless handset:
Press OFF or return the handset to the charger.
Using the telephone base:
Press /SPEAKER or hang up the corded handset.
Handset
speakerphone
During a call, press /SPEAKER to switch between
handsfree speakerphone and normal handset use.
Redial Using a cordless handset:
Press REDIAL repeatedly to select the desired entry ->
PHONE or /SPEAKER to call.
Using the telephone base:
Press REDIAL repeatedly to select the desired entry ->
/SPEAKER or lift the corded handset to call.
Volume control
Press VOLUME to decrease or press VOLUME to
increase the listening volume during a call.
On the telephone base, press VOL to decrease or press
VOL to increase the listening volume during a call. On a
cordless handset, press or .
Call waiting
(Requires
subscription
from telephone
service provider)
Press FLASH on the handset or PTT/FLASH on the telephone
base to put current call on hold and to take the new call;
press again to switch back and forth between calls.
Operate

AT&T CL84215 Specifications

General

Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Record Time	22 minutes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	2, 12
Backlit Keypad	yes
Frequency	dect 6.0 digital