5
Install
Telephone base
Charger
Caution: Use only the power adapter(s) provided with this product. To obtain a
replacement, visit our website at
https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
Plug the power adapter into a power
outlet not controlled by a wall switch.
Plug the other end
of the telephone
line cord into the
telephone jack on
the back of the
telephone base.
Plug the small end of the
telephone base power
adapter into the power
adapter jack on the back
of the telephone base.
Plug the large end of
the telephone base
power adapter into
a power outlet not
controlled by a wall
switch.
Plug one end of the
telephone line cord
into a telephone
jack or a DSL lter.
If you have DSL
high-speed Internet
service, a DSL lter
(not included) is
required.
Telephone
line cord
Route the cords
through the channels.
Plug the other end of
the coiled handset cord
into the jack on the back
of the telephone base.
One end of the coiled
telephone line cord has
already been plugged
into the handset. Make
sure it is plugged in
rmly.
Route the
handset cord
through its
channel.
To Next Page
Loading...
Need help?
General
