AT&T CL84215 User Manual

Getting started
11
Installation options
3. If necessary, bundle the telephone cord and power adapter cord, and
secure them with twist ties. Plug the power adapter and telephone line
into the wall outlets.
4. Align the mounting studs on the mounting plate with the mounting holes
on the bracket and press the telephone base down until it clicks securely
into place.
2. Slide the handset tab upward. Rotate the handset tab by 180 degrees.
The protruding edge of the handset tab holds the corded handset in place
when the telephone is mounted on the wall.
Handset tab
Switch hook

AT&T CL84215 Specifications

General

Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Record Time	22 minutes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	2, 12
Backlit Keypad	yes
Frequency	dect 6.0 digital