AT&T CL84215 User Manual

Multiple handset use
Handset locator
The handset locator feature is useful if you
misplace any handsets.
To start the paging tone:
Press /HANDSET LOCATOR on the
telephone base to start the paging tone on
all handsets for 60 seconds.
NOTE: If you press OFF/CANCEL or MUTE/DELETE
on a handset, the ringer of that handset stops, but
the paging to the rest of the handsets continues.
To stop the paging tone:
Press PHONE/FLASH, /SPEAKERSPEAKER, or
any dialing key (0-9, TONE or #) on the
handset(s).
-OR-
Press /HANDSET LOCATOR, MUTE or
CANCEL on the telephone base.
Join a call in progress
When a handset or the telephone base is already on a call and you would
like to join the call, press PHONE/FLASH or /SPEAKERSPEAKER on your handset or
/SPEAKERSPEAKER on your telephone base, or lift the corded handset.
To end the call using a cordless handset, press OFF/CANCEL or place the
handset in the charger. To end the call using the telephone base, press
/SPEAKERSPEAKER or return the corded handset to the telephone base. The call
does not end until all handsets and the telephone base hang up.
NOTE: You can use up to four system handsets and the telephone base at the same time
on an outside call.
•
•
•
Multiple handset use
44
** Paging **

AT&T CL84215 Specifications

General

Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Record Time	22 minutes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	2, 12
Backlit Keypad	yes
Frequency	dect 6.0 digital