AT&T CL84215 User Manual

Getting started
12
Installation options
Wall-mount to tabletop installation
To change the telephone base from the wall-mount position to tabletop position:
1. Remove the telephone base from the wall.
2. If necessary, untie the bundled telephone cord and power adapter cord.
Make sure that you unplug the power adapter and telephone line cord
from the wall outlets before you begin.
3. Push, as indicated by arrows in the illustration, until the bracket is
released, and then rotate it upward until it clicks into the tabletop position.
Table-mount
Wall-mount
Side view
Bottom view

AT&T CL84215 Specifications

General

Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Record Time	22 minutes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	2, 12
Backlit Keypad	yes
Frequency	dect 6.0 digital