Answering system
77
Answering system settings
To record a new outgoing announcement:
Using a cordless handset:
When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
Press qCID or pDIR to scroll to Answering sys, then press
MENU/SELECT.
Press MENU/SELECT again to select Announcement.
Press MENU/SELECT to select Record annc. The system announces,
“Record after the tone. Press 5 when you are done.”
Speak towards the handset to record your announcement. Press 5 to end
recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and press
MENU/SELECT.
Using the telephone base:
When the telephone base is in idle mode, press
/RECORD.
Press qCID or pDIR to scroll to Announcement, then
press MENU/SELECT. The system announces, “Record
after the tone. Press 5 when you are done.”
Speak towards the telephone base to record your
announcement. Press 5 to end recording. Your
recorded announcement plays.
-OR-
When the telephone base is in idle mode, press
MENU/SELECT to enter the main menu.
Press qCID or pDIR to scroll to Answering sys, then
press MENU/SELECT.
Press MENU/SELECT again to select Announcement.
Press MENU/SELECT again to select Record annc.
The system announces, “Record after the tone. Press 5
when you are done.”
Speak towards the telephone base to record your announcement. Press 5
to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and press
MENU/SELECT.
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
4.
5.
>Record annc
Play annc
p
q
>Announcement
Delete all old
p
q
>Record annc
Play annc
Record memo
>Announcement
p
q
To Next Page
Loading...
