AT&T CLP99383 User Manual

Appendix
133
Display screen messages
Screen messages
No messages
There are no messages in the answering system.
No PTT call
The incoming PTT function is turned off. The handset will not
receive PTT calls.
No signal.
Call ended.
The phone lost connection with the telephone base or did not
have a strong enough signal and the phone call ended.
Not available
at this time
Someone else is already using the directory or caller ID log.
When a handset tries to access the answering system or
Bluetooth menu during battery backup mode.
Number
already saved
The telephone number you have entered is already in the
directory.
Out of range
OR no power
at base
The telephone base has lost power, or the handset is out
of range.
** Paging **
The cordless handset is paged by the telephone base.
Paging all devices
The telephone base is paging all devices.
Place in charger
The battery is very low. The handset should be charged.
PTT From
HANDSET X
To devices:
X
One handset has started a PTT session to another handset and
telephone base.
PTT From
HANDSET X
To devices:
X
One handset has started a PTT session to another handset.
PTT To
HANDSET X
You have started the PTT process with a handset.
PTT To
BASE 0
You have started the PTT process with the telephone
base.
Push to talk
Ended
The PTT session is ended.
Quiet mode on
QUIET mode is on.
Quiet mode is off
QUIET mode is turned off.

AT&T CLP99383 Specifications

General

Brand	AT&T
Model	CLP99383
Category	Cordless Telephone
Language	English