AT&T CLP99383 User Manual

Telephone settings
Handset and telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse dialing
before using the telephone.
To set the dial mode:
1. Press MENU in idle mode to enter the main menu.
2. Press qCID or pDIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to scroll to
Settings, then press SELECT.
3. Press qCID or pDIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Dial mode,
then press SELECT.
4. Press qCID or pDIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to
highlight Touch-tone or Pulse, then press SELECT.
There is a confirmation tone and the screen returns
to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU on the handset or telephone base in idle mode to enter the
main menu.
2. Use qCID or pDIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to scroll to Web address, then press SELECT.
45
p
q
SELECT
BACK
SETTINGS
Key tone
CID time sync
Dial mode
SELECT
SETTINGS
Key tone
CID time sync
Dial mode
BACK S
BACK
DIAL MODE
Touch-tone
Pulse
BACK
SELECT
p
q
SELECT
BACK
DIAL MODE
Touch-tone
Pulse2

AT&T CLP99383 Specifications

General

Brand	AT&T
Model	CLP99383
Category	Cordless Telephone
Language	English