AT&T CLP99383 User Manual

Multiple handset use
73
Push-to-talk (PTT)
You can directly broadcast messages to the speakerphone of any
device. Press and hold PUSH TO TAL� on a handset or PTT on
the telephone base to begin two-way communication.
Only one device can talk at a time. While talking to another
device, press and hold PUSH TO TAL� on the handset or PTT
on the telephone base.
You must release PUSH TO TAL� on the handset or PTT on the
telephone base, so the other person can respond.
Only one PTT session can be active at a time.
While PTT is in use between two devices, other devices cannot use the
intercom feature but can access the answering system.
When you attempt to place a PTT call to another device which is accessing
the answering system or on an intercom call or outside call, your device
screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on.
Turn PTT on or off
Using a cordless handset:
1. Press PUSH TO TAL� when the handset is not in use. The
PUSH TO TAL� menu displays.
2. Press qCID or pDIR to highlight PTT On/Off, then press
MENU/SELECT.
3. Press qCID or pDIR to choose On or Off, then press
SELECT.
Using the telephone base:
1. Press PTT when the telephone base is not in use. The PUSH
TO TAL� menu displays.
2. Press qCALLER ID or pDIRECTORY to highlight PTT On/Off,
then press SELECT.
3. Press qCALLER ID or pDIRECTORY to choose On or Off, then press SELECT.
NOTE: The handset or the telephone base screen displays No PTT call when PTT is
turned off.
•
•
•
•
•
PTT
73
SELECT
PUSH TO TALK
HANDSET 2
Group
PTT On/Off
BACK
BACK
SELECT
INCOMING PTT
On
Off
CK S

AT&T CLP99383 Specifications

General

Brand	AT&T
Model	CLP99383
Category	Cordless Telephone
Language	English