AT&T CLP99383 - Answer a PTT Call

Multiple handset use
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call as described below.
Using a handset or the telephone base:
When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your
device shows:
PTT From HANDSET X To devices: X (the first X represents the
initiating handset number, and the second X represents your handset
number; a maximum of four handset numbers appear).
-OR-
PTT From BASE 0 To devices: X (the X represents your handset
number; a maximum of four handset numbers appear).
When your speakerphone light is off (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TAL� on your handset or PTT on
your telephone base. You will hear a chirp. Speak towards the device.
While you are speaking, your device shows PTT To Handset: X
(X represents the handset numbers of one or more destination handsets;
a maximum of four handset numbers appear) or
PTT To devices: X (X represents the handset numbers of one or more
destination handsets; a maximum of four handset numbers appear).
Your voice is broadcast to all destination devices.
After speaking, release PUSH TO TAL� on your handset or PTT on
your telephone base. Your device will beep. After the beep, if your
speakerphone light is off, you can press and hold PUSH TO TAL� on
your handset or PTT on your telephone base to continue speaking, or the
destination device can respond.
1.
2.
•
•
3.
•
•
78