Multiple handset use
14
Intercom call
Use the intercom call feature for conversations between two handsets. This
feature is only available if you have at least two system handsets. Intercom
call is not available for the CRL32102 model. You can buy accessory
handsets
(AT&T model CRL30102) to expand your system.
Use a handset to initiate intercom call calls and transfer calls.
1. Press MENU/SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to >Intercom, then press MENU/SELECT. Choose from the
following options.
If you have a two-handset system, your handset screen shows
Calling other handset.
If you have more than two handsets, your screen shows INTERCOM TO:
Press qCID or pDIR to scroll to the desired handset and press
MENU/SELECT. Your handset screen shows Calling HANDSET X or
Calling all handsets.
The other handset(s) rings and shows either Other handset is calling
or HANDSET X is calling (HANDSET represents the handset name, X
represents the handset number).
2. To answer the intercom call, press PHONE/FLASH, /SPEA�ERSPEA�ER or any
dialing key (0-9, TONE , or
#
) on any called handset.
3. To end the intercom call, one party presses OFF/CANCEL, or places the
handset back in the telephone base or charger. The other party hears four
beeps. Both handsets display Intercom ended.
•
•
To Next Page
Loading...
Need help?
General
