Caller ID
20
Caller ID
Save a caller ID log entry to the directory
1. When in the caller ID log, press qCID or pDIR to browse.
2. Press MENU/SELECT to select an entry. The screen displays EDIT NUMBER.
3. Use the dialing keys to edit the number.
Press qCID or pDIR to move the cursor to the left or right.
Press MUTE/DELETE to backspace and erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a p appears).
4. Press MENU/SELECT to move to the name. The screen displays EDIT NAME.
Use the dialing keys to edit the name.
Press qCID or pDIR to move the cursor to the left or right.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press # to move the last word to the front. For example, Johnson
Charlie becomes Charlie Johnson when you press #.
5. Press MENU/SELECT when done. The handset shows Saved.
NOTES:
You might need to change how a caller ID number is dialed if the entry does not appear
in the correct format. Caller ID numbers might appear with an area code that is not neces-
sary for local calls, or without a 1 that is necessary for long distance calls (see View dialing
options on the previous page).
If the name you received from the telephone service provider is all in capital letters, the
first letter of every word remains a capital letter, while other letters become lowercase.
However, the next letter after the prefix “Mac”, “Mc”, or “O’”, is kept as a capital letter. For
example, the “D” in “MacDonald” is kept as a capital letter. Another exception is that “VAN
DER” will be changed to “Van der”.
If the telephone number from the caller ID information has already been saved in the direc-
tory under a different name, the new name will overwrite the old one.
•
•
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
