Telephone operation
14
Options while on calls
Audio Assist®
The Audio Assist
®
feature makes voices sound louder and clearer. Press
AUDIO ASSIST
®
while you are on a call using the handset to turn Audio Assist
®
on or off. This feature turns off automatically after you hang up.
Blind transfer
While on an outside call, you can transfer it to a specific handset or any
handset. This feature is not available for model CRL81112 unless you purchase
an accessory handset (AT&T model CRL80112).
To transfer an outside call directly without notifying the desired handset:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT to choose >Transfer.
If you have a two-handset system, the outside call is put on hold and your
handset screen shows Transferring call... The other handset rings and its
screen shows Transfer from other handset.
If you have more than two handsets, your screen shows TRANSFER TO:
Press qCID or pDIR to scroll to the desired handset and press
MENU/SELECT. The outside call is put on hold and your handset screen
shows Transferring call... or Transferring call to all...
3. To answer the call on the destination handset, press, press PHONE/FLASH or
/SPEA�ERSPEA�ER. The original handset shows Call transferred and goes to
idle mode.
•
•
Audio Assist
®
is a registered trademark of Advanced American Telephones.
To Next Page
Loading...
Need help?
General
