AT&T DL72519 - Directory; Create a New Entry in the Directory

37
Directory
The directory stores up to 1,000 entries, shared by all handsets.
Each entry may consist of a telephone number up to 30 digits, and a name up
to 15 characters.
Create a new entry in the directory
1. Press MENU/SELECT on the handset in idle mode.
2. Press CID or DIR to highlight Directory, then press MENU/SELECT .
3. Press MENU/SELECT again to choose Add new entry.
4. Use the dialing keys to enter a telephone number (up to 30 digits).
 Press CID or DIRtomovethecursortotheleorright.
 Press MUTE/DELETE on the handset to erase a digit.
 Press and hold MUTE/DELETE on the handset to erase all digits.
 Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a P appears).
-OR-
Press REDIAL/PAUSE to copy a number from the redial list. Press
CID or DIR , or press REDIAL/PAUSE repeatedly to locate the desired
number. Press MENU/SELECT to copy the displayed number.
5. Press MENU/SELECT to move on to the name.
6. Use the dialing keys to enter a name (up to 15 characters) when prompted.
Press a key repeatedly until the desired character shows on the screen.
 Press CID or DIRtomovethecursortotheleorright.
 Press 0 to add a space.
 Press MUTE/DELETE on the handset to erase a character.
 Press and hold MUTE/DELETE on the handset to erase all characters.
 Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT to store your new directory entry.
Directory