52
Smart call blocker
Call block settings
Review block list:
1. Press MENU/SELECT to enter the main menu when it is not in use.
2. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT.
3. Press CID or DIR to scroll to Block list, and then press MENU/SELECT.
4. Press MENU/SELECT to choose Review.
5. Press CID or DIR to browse through the block entries.
Note: List empty appears if there are no block entries.
Save a caller ID log entry to block list:
1. Search for the desired caller ID log entry (see Review the caller ID log on
page 40).
2. When the desired entry displays, press MENU/SELECT.
3. Press CID or DIR to scroll to To Block list, then press MENU/SELECT.
4. The handset displays Enter number. Use the dialing keys to edit the number,
when necessary.
Press CID or DIRtomovethecursortotheleorright.
Press MUTE/DELETE on the handset to backspace and erase a digit.
Press and hold MUTE/DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a P
appears).
5. Press MENU/SELECT to move to the name. The screen displays Enter name.
6. Use the dialing keys to add or edit the name.
Press CID or DIRtomovethecursortotheleorright.
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT when done.
To Next Page
Loading...
