Replacing a Handset
If you are replacing a handset on a system that has the maximum
number of handsets registered (4), or wish to change the
assigned handset number of your registered handsets, you must
first de-register the handsets, then re-register all handsets.
De-Register All Handsets
• Unplug the power supply from the base unit.
(E5634B/E5633/E5630/E5603B/E5600)
• Remove all handsets from the charge cradles and base.
• Plug in the power supply while pressing and holding the
HANDSET LOCATOR button.
• Continue pressing HANDSET LOCATOR until the IN USE,
CHARGING (E5634B/E5633/E5630/E5603B/E5600) and
MESSAGE WAITING (E5603B and E5600 only) indicators are
lit. (this could take up to 10 seconds).
• Release the HANDSET LOCATOR button.
• All Handsets will display:
Once the base indicators turn off (up to 30 seconds), the
handsets have been de-registered from the base, and can now be
re-registered (see page 5).
4
ENTER BASE ID
To Next Page
Loading...
Need help?
General
