21
Adding and registering handsets
Your telephone system can support up to ve handsets. The handsets provided
within your product package are already registered as HANDSET 1, and so forth. You
can purchase additional handset (AT&T EL50003 or AT&T EL50013) to expand your
telephone system. EL50003 (silver) is for use with EL52103/EL52203/EL52253/
EL52303/EL52353/EL52403/EL52503. EL50013 (champagne) is for use with
EL52113/EL52213/EL52313/EL52333/EL52513. Additional handsets are assigned
numbers in the sequential order they are registered (up to HANDSET 5). Each handset
must be registered to the telephone base before use.
Register a handset to the telephone base:
Before you begin registration, make sure
the handset is out of the telephone base
or charger and shows To register HS... and
...see manual, alternately.
Put the handset you wish to register on the
telephone base cradle.
The IN USE light on the telephone
base turns on. Aer about 10 seconds,
the handset shows Registering.... The
handset shows Registered and you hear
a conrmation tone if the registration
was successful. The IN USE light turns o.
The handset is now registered with the
telephone base.
If the registration fails, the handset displays Failed and then To register HS... and
...see manual, alternately. Try the registration again by removing the handset from the
telephone base and then placing it back in.
notes:
You cannot register a handset if any other system handset is in use.
You can only register one handset to the telephone base at a time.
1.
2.
3.
•
•
For registration, put the handset on the
telephone base, not the handset charger.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
