AT&T EL52209 - Ringer Tone; Key Tone; LCD Language

Handset settings
10
Telephone settings
Ringer tone
This feature allows you to choose one of 10 ringer tones.
1. Press MENU/
SELECT in idle mode to enter the main
menu.
2. Use TCID or DIRS to scroll to RINGER TONE, then
press
MENU/SELECT.
3. Press TCID or DIRS to sample each ringer tone.
4. Press
MENU/SELECT to save your preference and return
to the main menu.
Key tone
The handset is factory programmed to beep with each key press. If you turn
off the KEY TONE, there are no beeps when you press
keys.
1. Press MENU/
SELECT in idle mode to enter the main
menu.
2. Use TCID or DIRS to scroll to >KEY TONE, then press
MENU/SELECT.
3. Press TCID or DIRS to select ON or OFF.
4. Press
MENU/SELECT to save your preference and return
to the main menu.
LCD language
You can select the language used for all screen displays.
1. Press MENU/
SELECT in idle mode to enter the main
menu.
2. Use TCID or DIRS
to scroll to >LCD LANGUAGE, then
press
MENU/SELECT.
3. Press TCID or DIRS
to select ENGLISH, FRANÇAIS or
ESPAÑOL.
4. Press
MENU/SELECT to save your preference and return
to the main menu.
NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.
?LFZ!UPOF
MDE!MBOHVBHF
LFZ!UPOF
PO
?MDE!MBOHVBHF
TFU!EBUF0UJNF
MDE!MBOHVBHF
FOHMJTI
LFZ!UPOF
?SJOHFS!UPOF
2
SJOHFS!UPOF