8
Getting started
Battery installation and charging
After you install your telephone or power returns following
a power outage, the handset will prompt you to set the
date and time (see page 17). To skip setting the date and
time, press
OFF/CANCEL.
Date: MM/DD/YY
ECO
After the date and time setting is done or skipped, the
handset will prompt if you want to set up the answering
system. Press MENU/SELECT to start the answering system
setup via voice guide. For more details, see Voice guide
on page 55. To skip the setup, press
OFF/CANCEL on
the handset.
Voice guide to...
ECO
set up Ans sys?
ECO
To replace the battery, press the tab
and slide the battery compartment
cover downwards. Lift out the old
battery and disconnect it from the
handset. Follow the instructions to
install and charge the new battery.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
(model BT162342/BT262342). To order, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada,
dial 1 (866) 288-4268.
If you do not use the handset for a long time, disconnect and remove the
battery to prevent possible leakage.
•
•
To Next Page
Loading...
