62
Answering system
Answering system overview
Call screening
Call screening at the base:
If the answering system and call screening are
on, the announcement and the incoming message
can be broadcast at the telephone base when a
call arrives.
You can turn call screening on or off using
the handset (see Call screening on page 56).
When call screening is off, you can temporarily turn on the call screening
by pressing PLAY/STOP
or /VOLUME on the telephone base. The call
screening will automatically be off for the next incoming call.
If call screening is on and you want to silence the telephone base while it is
recording messages, press PLAY/STOP
on the telephone base. The call
screening will be on for the next incoming call.
Call screening at the handset:
If the answering system is turned on, when there is an incoming call and it is
answered by the answering system, the handset screen shows To screen call
and press [SELECT], alternately. By pressing MENU/SELECT, you can screen
the call at the handset.
To Next Page
Loading...
