AT&T EL52306 - Making a Call

Making, answering and ending calls
Making a call
To make a call:
Press PHONE/FLASH or /SPEAKER, then enter
the telephone number.
On-hook dialing (predialing):
Use the dialing keys to enter the telephone number
(up to 30 digits).
Press and hold REDIAL/PAUSE to insert a 3-second
dialing pause (a P appears).
Press MUTE/DELETE or OFF/CANCEL to erase digits.
Press and hold MUTE/DELETE or OFF/CANCEL to
return to idle mode.
Press PHONE/FLASH or /SPEAKER to call.
NOTES:
Pressing PHONE/FLASH to access services from your telephone service provider does not
affect the elapsed time.
When a handset is on a call and there is another handset attempts to access the directory or
caller ID log, the screen of the other handset shows not available.
Temporary ringer silencing
To silence the ringer temporarily on that handset only:
While the telephone is ringing, press OFF/CANCEL or
MUTE/DELETE.
To silence the ringer temporarily on the telephone base:
While the telephone is ringing, press /VOLUME on the
telephone base.
This turns off the ringer without disconnecting the call. The next incoming
call rings normally at the preset volume.
NOTE: Unless the ringer volume is turned off on that handset, each handset rings when
there is an incoming call.
•
1.
•
•
•
2.
•
•
•
•
ECO
Phone 0:01:30
888-722-7702
ECO
10:30
PM
11/20
10:30
PM
11/20
888-722-7702
The screen displays the
elapsed time as you talk
(in hours, minutes and
seconds).
ECO
Ringer muted
21
Telephone operation