Get Started
Rev 1 Aug.11 12
Power LED
The blue LED on the top of the mobile hotspot flashes:
• Slowly to indicate that it is powered on
• Quickly when the firmware is being updated
Included Accessories
• Micro USB cable — Used mainly for recharging the battery, although you can
also use it to tether the mobile hotspot to your computer
• AC adapter — Used with the USB cable to recharge the battery or to power
the mobile hotspot from a wall socket
For more information, see Recharge the Battery on page 30.
Optional Accessories
Additional accessories are available from www.sierrawireless.com/wheretobuy/
onlinestore/default.aspx.
Power Sources
You can power your mobile hotspot from:
• Rechargable battery included with the mobile hotspot
• USB port on your computer
• Wall socket using the AC adapter and USB cable
Battery charging.
No battery.
The mobile hotspot is powered on and connected to the AC charger.
The battery is charging through a USB connection.
The exclamation mark (!) in the battery outline indicates that the battery
is not recharging because the device is too hot to charge.
Make sure there is room for air to circulate around the device. If the
problem persists, move the device to a cooler environment.
Icon Indicates
To Next Page
Loading...
