Rev 1 Aug.11 33
3
3: Advanced Settings
This chapter provides information on how to change advanced settings. The
advanced settings enable you to configure various aspects of the device such as Wi-
Fi settings, WAN settings, router settings, etc.
Do not Automatically Install Driver for USB
Tethering
By default, a host driver is installed the first time you connect your mobile hotspot to
the computer via the USB cable. This driver enables the mobile hotspot to connect to
the Internet when it is tethered to a USB port on the computer via the USB cable
instead of using the Wi-Fi network.
If you do not want to use this feature and want to use USB cable only to charge the
mobile hotspot battery, you can set the host driver not to install.
To set the host driver not to install:
1. On the Mobile Hotspot Homepage, click the Advanced Settings icon ( ).
2. On the Device > Basic tab, beside Automatically install host driver for USB
tethering, select No.
3. Click Save.
Export / Import Router Options
You can export and import hotspot (router) settings. This is useful if you have more
than one device and you want the same settings on both, or to save your settings
before doing a factory reset or changing the settings.
To export router settings:
1. On the Device > Basic tab, beside Export Router Settings, click Export.
To Next Page
Loading...
