AT&T ML17929 User Guide

Option 2: To install your telephone in a high tabletop position, insert the fixed tabs of the mounting bracket into
the slots labeled b. Press the flexible tabs into the slots labeled a until they click into place.
2. Connect the telephone line cord(s) and the power cord to the telephone base.
If you subscribe to high speed Internet service (DSL – digital subscriber line) through your telephone line, you
must install a DSL filter between each telephone line cord and telephone wall jack. The filter prevents noise and
caller ID problems caused by DSL interference. Please contact your DSL service provider for more information
about DSL filters.
Option 1: If you have a two-line wall jack, install your telephone base, as shown below.

AT&T ML17929 Specifications

General

Model Number	ML17929
Lines Supported	1
Answering System	Digital
Caller ID	Yes
Speakerphone	Yes
Display	LCD
Call Waiting	Yes
Speed Dial	Yes
Handset Locator	Yes
Intercom	Yes
Redial	Yes
Volume Control	Yes
Power Source	AC Adapter
Battery	Rechargeable
Phonebook Capacity	50 names/numbers