8
The telephone is set to use line 1 by default for making calls. To change
the primary line, see Set the primary line in the user’s manual. When you
answer a call, the telephone automatically selects the ringing line.
Making, answering or ending a call
To make a call with the speakerphone:
Press SPEAKER to use the primary line.
-OR-
To override automatic line selection, press
SPEAKER , then press LINE 1 or LINE 2.
-OR-
If you choose Speakerphone in Choose the
preferred mode (see user’s manual), press
LINE 1 or LINE 2 directly to activate the
speakerphone.
Wait for a dial tone, then dial the telephone
number. The screen displays the elapsed time as
you talk (in hours, minutes and seconds).
Press SPEAKER to hang up.
To make a call with the handset:
Lift the handset to use the primary line.
-OR-
To override automatic line selection, lift the handset, then press LINE 1 or
LINE 2.
Wait for a dial tone, then dial the number.
Place the handset on the telephone base to hang up.
To make a call with the corded headset:
Make sure the corded headset is connected to the telephone base (see
Optional headset in the user’s manual).
Press HEADSET on the telephone base to use the primary line.
-OR-
To override automatic line selection, press HEADSET, then press LINE 1 or
LINE 2.
-OR-
If you choose Headset in Choose the preferred mode (see user’s manual),
press LINE 1 or LINE 2 directly to activate the headset.
Wait for a dial tone, then dial the number.
Press HEADSET to hang up.
1.
2.
3.
1.
2.
3.
1.
2.
3.
To Next Page
Loading...
Need help?
General
